Screw in Studs for Standard Duplo Jumper and Duplo Jumper STS
(Set of 4) available in 8 mm and 12 mm including GST
If you would like to use larger studs such as 8 mm or 12 mm, we recommend the Duplo Jumper models with thread inserts that are firmly fixated in the ring shaped metal inlay. Thanks to the additional stabilization, the thread inserts can not be levered out of their position even during extreme strain, like landing and turning after a jump or turning tight in high speed.
The Duplo Jumper models with additionally fixated thread inserts are suitable for screw in studs of 8 mm or 12 mm. When screwed in, the stud sinks into the thread for about 3 mm – that way, the first pitch of the screw thread won’t be damaged even during abrasion and the thread will be easier to clean. The actual height of the stud is therefore 5 mm (in case of 8 mm studs) or 9 mm (in case of 12 mm studs). We do not recommend using larger studs because they strain the horseshoe and the horse’s health too much.
Careful: These large studs are only suitable for horseshoes with thread inserts that are firmly fixated in the metal inlay like the Duplo Jumper models!
|118 mm||M8 / M10||M8 / M10||M10|
|122 mm||M8 / M10||M8 / M10||M10|
|126 mm||M8 / M10||M8 / M10||M10|
|130 mm||M8 / M10||M8 / M10||M10|
|134 mm||M8 / M10||M10 / M10||M10|
|138 mm||M8 / M10||M10 / M10||M10|
|142 mm||M10 / M10||M10 / M10||M10|
|146 mm||M10 / M10||M10 / M10||M10|
|150 mm||M10 / M10||M10 / M10|
|154 mm||M10 / M10||M10 / M10|