Screw in Studs for Standard Duplo Jumper
If you want to use larger studs, we recommend Duplo models with thread inserts that are firmly fixated in the metal inlay – currently, that is every horseshoe with ring-shaped metal inlay. Thanks to the additional stabilization, the thread inserts cannot be levered out of their position even during extreme strain.
The Duplo models with additionally fixated thread inserts are suitable for screw studs of 8 mm or 12 mm. When screwed in, the stud sinks into the thread for about 3 mm – that way, the first pitch of the screw thread won’t be damaged even during abrasion and the thread will be easier to clean. The actual height of the stud is therefore 5 mm (in case of 8 mm studs) or 9 mm (in case of 12 mm studs). We do not recommend using larger studs because they strain the horseshoe and the horse’s health too much.
Careful: The large studs are only suitable for horseshoes with thread inserts that are firmly fixated in the metal inlay!
|118 mm||M8 / M10||M8 / M10||M10|
|122 mm||M8 / M10||M8 / M10||M10|
|126 mm||M8 / M10||M8 / M10||M10|
|130 mm||M8 / M10||M8 / M10||M10|
|134 mm||M8 / M10||M10 / M10||M10|
|138 mm||M8 / M10||M10 / M10||M10|
|142 mm||M10 / M10||M10 / M10||M10|
|146 mm||M10 / M10||M10 / M10||M10|
|150 mm||M10 / M10||M10 / M10|
|154 mm||M10 / M10||M10 / M10|